TowerPro n18A Brushless Speed Controller
TowerPro n18A Brushless Speed Controller
Amp rating: 18A (max 20A burst)
FETs: 12
BEC Current: 1.5A
Timing: Auto
Freq: 8khz
Lipo: 2 and 3 cell lipo
NiMH: 6~16
Weight: 19.5g (22 with wires)
This is an excellent and cheap besc.
This besc has all the basic features that most bescs have, at half the price!
You wont beat an ESC at this price with these features!
Kommentaar van onze klanten:
1) il serait dommage de s'en passer à ce prix là!!
Pas de programmation à faire, on branche et tout se passe bien.
merci
2) I use this ESC with my TowerPro Brushless Outrunner 2408-21, propeler 8x4 and 2S 1800mAh. With this configuration I can fly around 45min and after that ESC is almost cold. I was surprised with the amount of features you can set. In the manual is written only 2 thinks and you can set 4 of them. Very nice feature is indication - noise - coming from the motor in case of lack of transmitter signal. This can be used as lost model signal. Free of charge feature. I strongly recomend this ESC for smaller models - trainers.
!
<<
|